Boundary Layer Flow and Heat Transfer of FMWCNT/Water Nanofluids over a Flat Plate

Boundary Layer Flow and Heat Transfer of FMWCNT/Water Nanofluids over a Flat Plate

Blog Article

In the present study, the heat transfer and flow of water/FMWCNT (functionalized multi-walled carbon nanotube) nanofluids over a flat plate was investigated using a finite DOPA Mucuna volume method.Simulations were performed for velocity ranging from 0.17 mm/s to 1.7 mm/s under laminar regime and nanotube concentrations up to 0.2%.

The 2-D governing equations were solved using an in-house FORTRAN code.For a specific free stream velocity, the presented results showed that increasing the weight percentage of nanotubes increased the Nusselt number.However, an increase in the solid weight percentage had a negligible RAW CACAO POWDER effect on the wall shear stress.The results also indicated that increasing the free stream velocity for all cases leads to thinner boundary layer thickness, while increasing the FMWCNT concentration causes an increase in the boundary layer thickness.